PETRI STEERING WHEEL TO MOMO HUB ADAPTER
Solution for the unobtainable Petri hubs for BMW
If you are into classic BMWs like the beautiful BMW E9, the CS, CSi and CSL or the smaller BMW E10, the 2002, you came across the wonderful and classic BMW sports steering wheel made by Petri. It was available for these models in different sizes but not all of the mentioned above came with such a wheel from the factory. And with the ever-increasing popularity of these cars, the desire to install such a steering wheel is also growing. In a 3.0 CSi for example or a 2002 tii.
As Amazon Associate I earn from qualifying purchases. I may receive a small commission at no additional cost to you for purchases made through links in this post.
So far, no problem – if you find a hub adapter for either of these models. Since the wheels have been sold as a set only, it is really hard to find a single hub adapter either for the E9 or the E10. That’s one point. But what if you want to put such a Petri steering wheel into a totally different car, a vintage Toyota or whatever. Or, not to go that far – in a BMW E30? So far there was no possibility to do that in a reasonable way. But now it is.
Since the Victor to Momo hub adapter was such a big hit, I got a number of requests whether I could develop and manufacture such an adapter for the Petri sports steering wheel to install a Petri sports steering wheel together with such an adapter onto a regular Momo hub. It took quite some time to actually design that piece, manufacture prototypes, test them and adjust them. But here they are, for the first time. And they are so new, I haven’t had the chance to take pictures yet. But I’d rather ship a few before I take better images.

The all new Petri to Momo hub adapter

The Petri to Momo hub adapter with the cover/trim ring
Installation is super easy. Install your Momo hub as usual, bolt the Petri to Momo hub adapter on top and finally bolt the Petri sports steering wheel together with the cover ring on top of the adapter. Easy as 1-2-3. And yes, the adapter comes with a cover ring or trim ring.







Facts about the Petri steering wheel to Momo hub adapter
- Type 7075 rolled, high strength aluminium
- 10mm thick
- Black anodized, app. 15µ
- Superprecise tight fitment
- Works with every classic Petri sports steering wheel
- Designed to work with Momo hubs (PCD 6×70)
- Screws included
- Made in Germany by an Airbus supplier